What Is Chamfering Machinery?
Chamfering machinery is a processing machine that removes the corners of wood, steel, and other materials by turning the corners into a C-face.
It also plays a role in preventing injury from the standing of corners, especially on hard materials.
If there are chamfering instructions on the drawing, the drawing will show “C2”.
This means that the length and width are chamfered with chamfering machinery to remove 2 mm.
Depending on the material and other factors, chamfering machinery can be changed to remove the surface.
Chamfering machinery chips are also available in different types, such as wood and steel.
Uses of Chamfering Machinery
Chamfering machinery is used to remove corners.
The following is a description of the uses of Chamfering machinery.
Handheld Type Chamfering Machinery
- This tool is used for chamfering steel and other materials.
- This machine can be carried to high places such as a job site.
Handy Type Chamfering Machinery for Curved Line Processing
- This is a tool for chamfering steel materials.
- It is not limited to C-face but can also process R-shaped curves.
Desktop Type Chamfering Machinery
- Chamfering machine for steel materials, etc.
Pipe Chamfering Machinery
- Chamfering machinery for outside and inside of steel pipes.
Features of Chamfering Machinery
Chamfering machinery is used to remove corners.
Features of Chamfering machinery are described below.
Processing shape of chamfering
- C chamfer
- R chamfer
- Thread chamfering (fine chamfering)
Handy Type Chamfering Machinery
- Portable type.
- This chamfering machine is used when chamfering cannot be performed with larger machines.
Handheld Chamfering Machinery for Curved Line Processing
- Portable type.
- Shapes that can be chamfered
- Hole diameter: Delete corner
- Radius: Delete corner
- Groove: Delete corner
- Square: Delete corner
- R chamfer: radius corners
-
- Chamfering is available in a wide range of shapes.
Desktop Type Chamfering Machinery
- Chamfering machinery to remove burrs after cutting.
Pipe Chamfering MachineryMentry
- Tool only for chamfering
- Chamfering inside and outside of the pipe.
- Mainly for PVC pipes
- Disadvantages
- Steel pipes are tough
Electric Pipe Reamer
- Used primarily for chamfering steel pipes
- Fast because it is electric
- Can take inner and outer faces
- Disadvantages
- Equipment is expensive
Pipe Reamer Manual
- Can be chamfered while turning by hand
- Can ream both inside and outside surfaces
- Can be used without a power source
- Disadvantages
- Aligned for each pipe type and diameter