全てのカテゴリ
閲覧履歴
返答率
100.0%
返答時間
23.8時間
返信の比較的早い企業
シリーズ
フレームグラバー取扱企業
バスラー・ジャパン株式会社カテゴリ
もっと見る
ビデオインターフェースの製品66点中、注目ランキング上位6点
電話番号不要
何社からも電話が来る心配はありません
一括見積もり
複数社に同じ内容の記入は不要です
返答率96%
96%以上の方が返答を受け取っています
返答時間が24時間以内の企業の中での注目ランキング
電話番号不要
何社からも電話が来る心配はありません
一括見積もり
複数社に同じ内容の記入は不要です
返答率96%
96%以上の方が返答を受け取っています
| 商品画像 | 品番 | 価格 (税抜) | ポート数 | 保管温度 | ビット深度 | 対応カメラ | 適用法令 | センサー種別 | コンフィギュレーション | ケーブル長 | 消費電力/電源 | センサー画素数 | コネクター | 注文番号 | 相対湿度 (動作時/保管時) | オンボードメモリー | データ転送速度 | データ転送速度 (1チャンネル当たり/合計) | 製品ライン | インターフェース | 準拠規格 | 試験環境 | アクセサリー種別 | 製品シリーズ | バスインターフェース | 寸法 | 平均故障間隔 (MTBF) | インターフェースによる電源供給 (1チャンネル当たり) | 電源出力 | バスインターフェース性能 | プロセッサー | 動作温度 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Basler microEnable 5 marathon ACL |
要見積もり |
2 |
-50℃ up to 80℃ |
・24-48-bit (color) |
・area scan camera |
・CE class B |
・CFA sensor (Bayer) |
・CL-base |
0 - 10 meters |
12 V, 1 A Voltage, typ. current (actual values depend on processing) |
16k*64k (area scan sensor), 32k (line scan sensor),16k (-65k) (line scan sensor, depends on applet) |
2 x SDR/HDR26 (miniCL) |
2200000358 |
5% - 90% non-condensing (operating) , 0% - 95% (storage) |
512 MByte DDR3-RAM |
6.8 Gbit/s (850 MB/s) |
6.8 Gbps; 6.8 Gbps (850 MB/s) |
Acquisition |
Camera Link |
Camera Link 2.0 |
Camera Simulator |
Frame grabber |
marathon Frame Grabber |
PCIe 2.1 x4, DMA1800 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
pending |
PoCL (4W/12V per cable, Safe Power) |
PoCL SafePower, 4W/12V per cable |
up to 1.800 MB/s (sustainable) |
Xilinx Kintex7 XC7K70T |
- | |
|
|
Basler CXP-12 Interface Card 1C |
要見積もり |
1 |
-50 - 80℃ |
・24-48-bit (color) |
area scan camera |
・CE class B |
・CFA sensor (Bayer) |
CXP-12; 1 camera |
11 - 40 meters |
Typ. 13,4W@12V, excluding camera and I/O power output |
32k*64k (area scan sensor) |
1 x Micro-BNC/HD-BNC |
2200000269 |
5% - 90% non-condensing (operating) , 0% - 95% (storage) |
1 GByte DDR4-RAM |
1 x 12.5 Gbit/s |
12.5 Gbps; 12.5 Gbps |
Acquisition |
CoaXPress (CXP-12) |
CoaXPress 2.0/2.1 |
- |
Frame grabber |
CXP-12 Interface Cards |
PCIe 3.1 x4 |
PCIe Standard height, low profile card: 167.64 mm length x 68.9 mm height |
2.399.621 h |
- | - |
3938 MB/s (theoretical) , 3260 MB/s (typical/max.) |
Xilinx Ultrascale+ KU3P |
0 - 50℃ |
|
|
|
Basler CXP-12 Interface Card 2C |
要見積もり |
2 |
-50 - 80℃ |
・24-48-bit (color) |
area scan camera |
・CE class A |
・CFA sensor (Bayer) |
CXP-12; up to 2 cameras |
11 - 40 meters |
Typ. 13,4W@12V, excluding camera and I/O power output |
32k*64k (area scan sensor) |
2 x Micro-BNC/HD-BNC |
2200000701 |
5% - 90% non-condensing (operating) , 0% - 95% (storage) |
1 GByte DDR4-RAM |
2 x 12.5 Gbit/s |
12.5 Gbps; 25 Gbps |
Acquisition |
CoaXPress (CXP-12) |
CoaXPress 2.0/2.1 |
- |
Frame grabber |
CXP-12 Interface Cards |
PCIe 3.1 x8 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
2.137.243 h |
- | - |
7876 MB/s (theoretical), 6520 MB/s (typical/max.) |
Xilinx Ultrascale+ KU3P |
0 - 50℃ |
|
|
|
Basler microEnable 5 marathon ACX-QP |
要見積もり |
4 |
-50℃ up to 80℃ |
・24-48-bit (color) |
・area scan camera |
・CE class B |
・CFA sensor (Bayer) |
CXP1-6; up to 4 cameras |
11 - 40 meters |
- |
8k (-65k) *65k (area scan sensor, depends on applet) ,65k (line scan sensors) |
4 x DIN 1.0/2.3 |
2200000354 |
5% - 90% non-condensing (operating) , 0% - 95% (storage) |
1 GByte DDR3-RAM |
4 x 6.25 Gbit/s |
6.25 Gbps; 25 Gbps |
Acquisition |
CoaXPress (CXP-6) |
CoaXPress 1.0/1.1 |
CoaXPress 1.0/1.1 |
Frame grabber |
marathon Frame Grabber |
PCIe 2.1 x4, DMA1800 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
pending |
PoCXP (13W/24V per cable, Safe Power) |
・13W/24V per cable |
up to 1.800 MB/s (sustainable) |
Xilinx Kintex7 XC7K160T |
50° (0 LFM) , 60° (100 LFM) FPGA operating temperature: 0℃ to 85℃ |
|
|
|
Basler CXP-12 Interface Card 4C |
要見積もり |
4 |
-50 - 80℃ |
・24-48-bit (color) |
area scan camera |
・CE class A |
・CFA sensor (Bayer) |
CXP-12; up to 4 cameras |
11 - 40 meters |
Typ. 13,4W@12V, excluding camera and I/O power output |
32k*64k (area scan sensor) |
4 x Micro-BNC/HD-BNC |
2200000702 |
5% - 90% non-condensing (operating) , 0% - 95% (storage) |
1,5 GByte DDR4-RAM |
4 x 12.5 Gbit/s |
12.5 Gbps; 50 Gbps |
Acquisition |
CoaXPress (CXP-12) |
CoaXPress 2.0/2.1 |
- |
Frame grabber |
CXP-12 Interface Cards |
PCIe 3.1 x8 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
48.475 h |
- | - |
7876 MB/s (theoretical), 6520 MB/s (typical/max.) |
Xilinx Ultrascale+ KU3P |
0 - 50℃ |
|
|
|
Basler imaWorx CXP-12 Quad |
要見積もり |
4 |
-50 - 80℃ |
・24-48-bit (color) |
・area scan camera |
・CE class A |
・CFA sensor (Bayer) |
CXP-12; up to 4 cameras |
11 - 40 meters |
Typ. 13,4W@12V, excluding camera and I/O power output |
32k*64k (area scan sensor) , 16k (line scan sensor) |
4 x Micro-BNC/HD-BNC |
2200000482 |
5% - 90% non-condensing (operating) , 0% - 95% (storage) |
1,5 GByte DDR4-RAM |
4 x 12.5 Gbit/s |
12.5 Gbps; 50 Gbps |
Acquisition |
CoaXPress (CXP-12) |
CoaXPress 2.0/2.1 |
Camera Simulator |
Frame grabber |
imaWorx Frame Grabber |
PCIe 3.1 x8 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
48.440 h |
- |
17W/24V DC regulated power per CXP connector |
7876 MB/s (theoretical), 6520 MB/s (typical/max.) |
Xilinx Ultrascale+ KU3P |
0 - 50℃ |
|
|
|
Basler microEnable 5 marathon VCL |
要見積もり |
2 |
-50℃ up to 80℃ |
・24-48-bit (color) |
・area scan camera |
・CE class B |
・CFA sensor (Bayer) |
・CL-base |
0 - 10 meters |
12 V, 1 A (actual values depend on processing) |
64k*64k (area scan sensor, VisualApplets) , 64k (line scan sensor, VisualApplets) |
2 x SDR/HDR26 (miniCL) |
2200000359 |
5% - 90% non-condensing (operating) , 0% - 95% (storage) |
2 GByte DDR3-RAM |
6.8 Gbit/s (850 MB/s) |
6.8 Gbps; 6.8 Gbps (850 MB/s) |
Processing |
Camera Link |
Camera Link 2.0 |
Camera Simulator |
Frame grabber |
marathon Frame Grabber |
PCIe 2.1 x4, DMA1800 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
pending |
PoCL (4W/12V per cable, Safe Power) |
PoCL SafePower, 4W/12V per cable |
up to 1.800 MB/s (sustainable) |
Xilinx Kintex7 XC7K160T |
- | |
|
|
Basler microEnable 5 marathon VCLx |
要見積もり |
2 |
-50℃ up to 80℃ |
・24-48-bit (color) |
- |
・REACH |
・CFA sensor (Bayer) |
・CL-base |
- |
12 V, 1.4 A (actual values depend on processing) |
- |
2 x SDR/HDR26 (miniCL) |
2200000360 |
5% - 90% non-condensing (operating) , 0% - 95% (storage) |
2 GByte DDR3-RAM |
6.8 Gbit/s (850 MB/s) |
6.8 Gbps; 6.8 Gbps (850 MB/s) |
Processing |
Camera Link |
Camera Link 2.0 |
Camera Simulator |
Frame grabber |
marathon Frame Grabber |
PCIe 2.1 x4, DMA1800 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
pending |
PoCL (4W/12V per cable, Safe Power) |
- |
up to 1.800 MB/s (sustainable) |
Vision Processor |
50° (0 LFM) , 60° (100 LFM) FPGA operating temperature: 0℃ to 85℃ |
|
|
Basler microEnable 5 ironman AD8-PoCL |
要見積もり |
2 |
-50 - 80℃ |
・24-bit (color |
・area scan camera |
・CE class A |
・CFA sensor (Bayer) |
・CL-deca (80bit) |
0 - 10 meters |
14 V, 2.5 A |
16k*64k (area scan sensor) , 16k (line scan sensor) |
2 x MDR26 |
108095 |
5-90%, relative, non-condensing |
1 GByte DDR3-RAM |
6.8 Gbit/s (850 MB/s) |
6.8 Gbps; 6.8 Gbps (850 MB/s) |
Acquisition |
Camera Link |
Camera Link 2.0 |
Camera Simulator |
Frame grabber |
ironman Frame Grabber |
PCIe 2.1 x8, DMA3600 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
on request |
PoCL (4W/12V per cable, Safe Power) |
PoCL SafePower, 4W/12V per cable |
up to 3.600 MB/s (sustainable) |
Xilinx Virtex6 XC6VLX195T FPGA |
0 - 50℃ |
|
|
|
Basler microEnable 5 marathon VCX-QP |
要見積もり |
4 |
-50℃ up to 80℃ |
・24-48-bit (color) |
・area scan camera |
・CE class B |
・CFA sensor (Bayer) |
CXP1-6; up to 4 cameras |
11 - 40 meters |
- |
16k (-32k) 65k (area scan sensor, depends on applet) ,16k-32k (line scan sensor, depends on applet) |
4 x DIN 1.0/2.3 |
2200000357 |
5% - 90% non-condensing (operating), 0% - 95% (storage) |
2 GByte DDR3-RAM |
4 x 6.25 Gbit/s |
6.25 Gbps; 25 Gbps |
Processing |
CoaXPress (CXP-6) |
CoaXPress 1.0/1.1 |
Camera Simulator |
Frame grabber |
marathon Frame Grabber |
PCIe 2.1 x4, DMA1800 |
PCIe Standard height, half length card: 167.64 mm length x 111.15 mm height |
pending |
PoCXP (13W/24V per cable, Safe Power) |
・13W/24V per cable |
up to 1.800 MB/s (sustainable) |
Xilinx Kintex7 XC7K160T |
50° (0 LFM) , 60° (100 LFM) FPGA operating temperature: 0℃ to 85℃ |
