MX200 V10 200V 1A Piezo Driver (有限会社メカノトランスフォーマ) のカタログ情報
MX200 V10 200V 1A Piezo Driver
製品個別カタログ
カタログ紹介
The MX200 is a complete power supply and highperformance linear amplifier module for driving
piezoelectric actuators. The MX200 can drive stack
actuators; standard piezoelectric actuators; two wire
benders; and three-wire piezoelectric benders
requiring a bias voltage. Output currents of up to
1 Amp are developed at frequencies up to 100 kHz
with less than 100 uV noise (10Hz to 10kHz). Bipolar
output voltages up to +/-100V are possible with an
external AC coupling capacitor.
The MX200 is protected against short-circuit,
average current overload, and supply under-voltage.
The MX200 can be used as a stand-alone module or
mounted to a base with four M3 screws. The PCB
mounting version (MX200-PCB) is supplied with
headers for direct mounting onto a host
motherboard.
piezoelectric actuators. The MX200 can drive stack
actuators; standard piezoelectric actuators; two wire
benders; and three-wire piezoelectric benders
requiring a bias voltage. Output currents of up to
1 Amp are developed at frequencies up to 100 kHz
with less than 100 uV noise (10Hz to 10kHz). Bipolar
output voltages up to +/-100V are possible with an
external AC coupling capacitor.
The MX200 is protected against short-circuit,
average current overload, and supply under-voltage.
The MX200 can be used as a stand-alone module or
mounted to a base with four M3 screws. The PCB
mounting version (MX200-PCB) is supplied with
headers for direct mounting onto a host
motherboard.
カタログについて
- カタログ名
- MX200 V10 200V 1A Piezo Driver
- 取り扱い企業
- 有限会社メカノトランスフォーマ
- 該当カテゴリ
- ピエゾ素子 ピエゾアクチュエータ ピエゾステージ
- カタログタイプ
- 製品個別カタログ
